Datomic Services

Drain Milling & Protruding Connection Works

What is Drain Milling?
Drain Milling is a great 'No Dig' solution as there is no need to excavate entire areas just to get to a drain pipe for inspection. Milling has many uses and isn’t only effective at removing drain build up deposits, however, it is also beneficial at dealing with any hard blockages it may encounter during the process. Drain Milling is a highly specialist service using complex equipment and we are fully certified in the safe use and application of these machines providing a 'peace of mind' solution to our customers.

Drain Milling as a technology is a specialist service designed to removed attached deposits such as scale, concrete, jointing compound and blockages from the walls of pipework without causing damage to the host pipework. Datomic Cutting provide Commercial Milling Drill Cutting Services and robotics milling cutters to commercial partners and the drainage industry. 

We use only the finest, German engineered equipment for Drain milling that is recognised and respected across the industry for its power and performance. Our remotely operated Drain milling machines and cutters can be deployed at over 100 metres from a single entrance point, with constant CCTV monitoring to diagnose the problem, milling heads that can cut precisely positioned laterals for connecting pipes, and powerful grinding capabilities to cut through steel bars, collapsed liners or any other obstruction. 

Drain Milling & Protruding Connection Services

We provide support to hospitals, schools and a range of commercial partners for Drain milling. Drain milling combines CCTV cameras, high-pressure cutting, and a wider bore cutting bit. Using this combination allows our expert drain millers to remove deposits and blockages from the inside of your drain pipes, increasing lateral flow and internal space maximising the full diameter of the pipe. In some instances, drain milling can leave a pipe flowing at a greater enhanced level than when installed.

There are a range of options when using this type of services and a milling bit is carefully selected to match the bore of the drain by one of our experienced, certified and fully insured professional drainage specialists until it is free of all its crusty deposits.

Datomic Cutting and Milling Sewer Robotics are battery or pneumatically operated for maximum range, flexibility and performance. The drain milling robot works by directing narrow, ultra high-pressure jets of water onto the hard deposits, effectively 'cutting' them into smaller pieces with our equipement capable of pressures up to 23,000 PSI
Available 24/7
Emergency Callouts
Over 40 UK Locations

 Commercial Drain Milling Experts

remove blockage in drains
We offer a Direct, Contract or Sub-Contract Service on all drainage works across the UK. Datomic are a fully certified and fully insured company that work to the highest standards in drain clearing and commercial drain unblocking. Each of our mobile operation units are fully equipped to deal with the task required. Each of the machines is supported by camera survey services which provide detail inspections of your drainage system. 

Datomic state-of-the-art equipment and highly trained and experienced professionals are drainage experts and can identify any issues affecting the drainage system’s performance. With the latest in CCTV drain surveying we provide a detailed overview and recommendations for any necessary repairs or maintenance. We drive to offer cost-effective drain blockage repairing solutions that minimise disruption to your operations and ensure the long-term performance of your drainage system.

Heavy Duty Commercial Drain Milling Services

Drain Milling in Drains
Providers of heavy duty, commercial drain clearing working in partnership with most of the UK's leading providers.

CCTV for Drain Inspections can help to find:
• Drain Flow Blockages and Leaks
• Displaced Joints within the Drain
• Minor and Major Tree Root Ingress
• Drain Corrosion, Wear and Tear
• Cracked and Collapsed Drains
• Cement, Concrete & Organic Scale Build-Up
• Signs of Poor Insulation and Failure
Investors in the latest Drain Cutting Technology
Streicher CL50 and CL80 Drain Cutters
Robotic cutting using the CL50 and CL80 are state of the art ‘climbing robots’ that enable us to cut at elevated locations and negotiate difficult bends, making previously inaccessible obstructions accessible. Specifically designed for smaller diameter pipework, 75mm up to 225mm, and can be made fully portable.
  • Removal of concrete / reinforced concrete
  • Removal of steel reinforced
  • Precisely re-open lateral connection
  • Pipes from 75mm up to 1000mm 
  • Removal of intruding connections 
  • Rapid response 24/7 for concrete cutting.
  • Nationwide Response team for concrete removal
Streicher CL50 - Streicher CL80
Prokasro Drain Cutting Robots
Driven by the best Drain Cutting technology
Prokasro 1.7 and 4.0 Robotic Drain Cutting
The 1.7 and the 4.0 are battery cutters operated and both come equipped with a 4th axis to allow full cutting range in up to 140 metres of pipework from a single access. Designed for larger diameter drainage, these units can work in pipework from 150mm up to 800mm and also have the capacity to work within egg culverts where most equipment would struggle. Perfect for the re-opening of lateral connections, removal of protruding connections and a variety of other obstructions. 
  • LED pan and tilt camera unit with self-cleaning features 
  • Battery operated milling motor for minimal noise pollution 
  • Powerful self-propelling robot for long-range cutting works 
  • Portable options available for remote working 
  • Full range of motion with complete control over the milling process 

Nationwide Drain Milling for Blocked Pipes, Blocked Sewers and Blocked Drains

Our experienced expert engineers can assess any drainage issue and explain the required work to resolve the problem and are committed to providing a high standard of service that is respectful of our customers’ privacy and property. Our code of conduct and company values require our operatives to carry out all work with due care and consideration, taking all reasonable precautions to protect your property and the surrounding environment being fully mindful of health and safety regulations and requirements, We will always try where possible to keep noise to a minimum.

Talk to us today about how we can help you, Blockages come in a range of issues from wooden fencing stoops, toys, cabling and other discarded objects can prove expensive to remove when you need to dig down/excavate. Our cutting equipment can employ a variety of cutting heads (grinding, milling, diamond impregnated) to break up the objects into manageable pieces before removing them from the system. Flexibility and adaptability are key.
Remember, The precise nature of our milling process means minimal damage is incurred to the host pipe and all works can be completed to a high level of accuracy. From reopening laterals to removing steel bars, we won’t let you down! 

 Guaranteed Drain Milling Services - Nationwide 24/7 

When you engage with Datomic we aim to provide our customers with the highest level of service, we have been offering our drain milling services nationwide for many years and our specialist experts will be more than happy to support your enquiry to ensure your drains are repaired both quickly and safely. So, if you’re experiencing drainage problems, we are always happy to offer advice and support.

A perfect solution for drain blockages where there is a :

• Hard blockages, including tree roots.
• Scale build-up
• Building materials cement, concrete and jointing compound

We offer a Direct, Contract or Sub-Contract Service on all drainage works across the UK with a vast amount of experience in larger and commercial drainage projects
Drain Milling Services
Share by: